>>22006 >What is the best/most effective tickle tool? I think this kinda depends on what reaction you consider "best". Like if you want screaming, then sharp objects. Feathers and makeup brushes if you want less intense reactions. >Do you have any original or lesser-known tickle tool ideas? Not innovative or anything, but dipping forks in lotion and applying it that way. You usually see oil or lotion applied first, then the tools after. >Which tools have you felt and what were they like? I've never actually asked a girl to do that. Not sure I would tbh. >Do you have any specific brands or tools you recommend? Nothing you can't pick up from CVS >What is the best way to use each tool? Depends on the lee. My ex had incredibly soft feet that were 8/10 ticklish but she would only really respond to light touches. I used oil and forks once and she didn't really react, but very light scratches with fingernails? that always got good reactions.

Does anyone have any good tools to tickle themselves? I tried oil and hair brushes but it didn't work. Also any good tongue sex toys anyone would recommend?

hex bugs

Are sheer socks really as good as tickle videos make them seem? They act like they’re as good or better than using oil and that you can feel a feather through them, but I can’t help but doubt it a little. Anyone have any experiences with them? >>22018 These are great. I had a bunch years ago and I can confirm they’re like just the tip of an electric toothbrush.

>>22006 Those gloves are top tier and I never see them used that much. Shame really.

My favorite for teasing tickles is the scalp massager. It has a nice spread and sensation. Dragging it over someone's belly or thighs has both the deliberate targets, and some randomness too since the little metal arms tend to drift around. For intense foot tickles the metal back scratcher on oiled soles is the tops. Someone on Tumblr has written about sound tickles. Like striking a tuning fork and holding it near the ear, making kissing sounds right by the ear, or the sound of tapping fingers on metal. Probably not usable on everyone but for the right ticklee I bet that can be intense.

>>39605 Can absolutely attest to the sound tickles. My ears are insanely sensitive at the best of times, but something about someone kissing your ears and hearing the sounds of their mouth and feeling the breath run over your ears..... GOD it drives me up the fucking walls in the best way

>>39605 big ups for this

i think different tools are good for different spots paint brushes are my all time fav for everywhere but brushes are nice for feet especially if the feet are freshly moisturized i think paint brushes are great for toes tho!

>>39611 My ears getting slurped on is one of the few things that make me scream without fail. Its like theres an off switch for my brain in them or smth

Years ago I saw an amateur vid where the 'ler used what I can I only describe as a small plastic pearl attached to some kind of vibrator. It wasn't very big, but it drove the 'lee absolutely insane when it was used on her feet. Has anyone seen something similar to this, or have the vid it was used in?

Anyone know where to get good feathers? Also any recommendations for toe restraints? Flat shoelaces won't hurt will they?

>>71691 Something like this? https://www.etsy.com/listing/1808671479/ I've been experimenting with different attachments to a vibrator

>>76705 Oh shit that's it. Thanks!

>>76705 yo, there's no way that thing costs that much. There's gotta be a generic equivalent on temu or some shit. The question is what name it's under

>>78243 Seems like it's a pretty recent invention from Japan and it's cheaper there https://booth.pm/ja/items/3974288%20#booth_pm but it's so new and our fetish is so niche that the Chinese didn't bother to dupe it yet :/

>>71691 I'd be very interested in video evidence this thing tickles as much as it's suggested.

>>78248 i may buy it if i can find a plug in japan to forward it, remind me then

>>78248 If I ever do come across the video, I will let this board know. But it was very amateur, and I think the couple was only on YouTube :(

>>78256 >>78248 Real talk, it seems pretty damn simple, how hard would it be to reverse engineer? You gotta: 1. pick the right vibrating motor 2. attach the little rod to it, can be one from a head massager 3. attach power supply to the motor if it doesn't come with it by default Did I miss anything? Any electronic geeks out there wanna give your thoughts on what motor would be right for the job?

>>78246 Problem with using BOOTH is that you're probably going to need to use a proxy service to get it shipped to you, which will push the cost up a lot vs Etsy which seems to have free postage. >>78259 It's difficult to tell exactly what kind of motor would be used without knowing the dimensions of the thing. There are many types of vibration motor so it shouldn't be too hard to find one that works. The more interesting part is that controller, from the symbols it's definitely something that has been repurposed from a vibrator. Some kind of power regulation is also going to be needed and it's not immediately obvious where it is in that setup.

>>78261 From reading through his X the motor and controller are custom parts he's buying in bulk, so it's probably going to be tricky to match it perfectly.

>>78261 >>78261 I wanna get it to work, not replicate it exactly. I recon the dimentions should be on the smaller side of handheld, that should guarantee enough weight. The question is what RPM do you need for it to tickle? aliexpress.com/item/1005007193061441.html this kinda thing looks alright at first glance, right?

>>78259 >>78265 the vibrator component appears to be (or at least is very similar to) the '2 egg black' option of https://www.aliexpress.us/item/3256804025850397.html?gatewayAdapt=nld2usa4itemAdapt i think i've found the exact battery box he's using as well, but you could also just punch '2 aa battery box usb' into aliexpress and take your pick: https://www.amazon.com/DGZZI-Female-Socket-Battery-Holder/dp/B09BNBRGLN i'm not sure if he's actually going through the trouble of soldering these components together, or if he's just using a bit of slight-of-hand to to keep the usb connection out of frame on his store. unfortunately, I have no idea what the attachments he's selling are, how to make them, or where to source the materials. but, i'd imagine you could basically just run to a dollar store or craft store, look at each product and think to yourself 'hmm, if that were vibrating really fast, would it tickle?' and play around and see what works. hope this helps. also, TIL that google lens is one hell of a tool!

>>78268 Nice find on the controller, that looks to be the exact one. Bet he's found a supplier who will sell him just the controller without the other stuff. The battery box looks generic. It's got a barrel plug instead of USB on it but yeah, I think you could just pick up a random one. The attachments all look to be build around prongs from head massagers, not sure if he's disassembling cheap head massagers or making them himself with some stiff wire and epoxy or something. >>78265 On X he claims he put in an order for a large amount of vibration motors with a certain RPM, but I can't see that he said what that RPM is anywhere unfortunately.

>>78268 Ok, i'm tempted to buy it and try this out. I'm just wondering about two things: 1. What makes you think it's this kind of egg specifically? The vibrating unit inside is not shown in the offer. Or is your guess based on the little pilot? 2. How best to attach the head massager rod so the vibrations are well transmitted and it's durable? Glue? Soldering? I feel like all that is gonna break pretty easily. Is there some obvious way I'm missing feasible for diy?

>>78281 Hmm, after another look I'm pretty sure those barrel plugs are for the vibrators, not the battery, but, I'm not sure. >>78291 1. Honestly, I don't have a solid reason for this. I would assume he's working with the same supplier as he could get better rates and a better chance at custom parts, and as such I assumed that the custom parts he's getting are very similar to the model I linked, but that might be completely false. There's a chance he's just getting the controllers that have barrel plugs where the motors would be, and getting the motors and shells elsewhere to assemble his own attachments. There do seem to be some nice motors out there with barrel sockets (https://www.aliexpress.com/item/3256805921343250.html) but I can't find any that look like his attachments. 2. I'm not sure. Glue would probably work, but then you'd only get one shot at it. You could use small zip ties, but that's a bit janky.